China High quality Slab Surface Repair Epoxy adhesive Quotes, Factory, Purchasing, Manufacturers
Home > Products > Stone Adhesive > Slab Surface Repair Epoxy adhesive

Slab Surface Repair Epoxy adhesive

Brand : MAGPOW

Product origin : China

Delivery time : 25-35 DAYS

Supply capacity : 100 TON/MONTH

[Applicable Scope]
The Slab Surface Repair Epoxy adhesive is used for repairing irregular cracks like micro-cracks, (sand holes, chicken patterns, ant roads) and uneven patches on the surface of various stones.

[Performance Characteristics]

The Slab Surface Repair Epoxy adhesive is in low viscosity and high penetration. It has strong adhesion and strength after cured.It is abrasion, water, oil, chemical and aging resistant.

[Product advantages]

1.Good age resistance.

2.Low odor, do no harms to workers.
3.High adhesion and strength, the glue layer is abrasion.
4.This Stone epoxy adhesive meet the standard of GB18583, ROHS, it is environmental friendly.

[Technical data]

No. Items Technical data
1 Appearance Part A colorless and transparent liquid
Part B
2 Viscosity (mPa•s) Part A 800-1500
Part B 30-80
3 Mix ratio(A∶B) 7:1
4 Pot life(25℃,min) 10-15
5 Initial curing time(25℃,h) 2-3
6 Shear Strength(RT48h,MPa) ≥7.0

[Curing Time]

Temperature(℃)  Pot life (min) Initial curing time(h)
5-10 20-30 5-8
10-20 15-20 3-5
20-30 10-15 2-3
30-40 5-10 1-2
PS: The time above is based on the mixed glue 600g

[Application Method]
1. Polish and level the composite plate to certain thickness; remove dust, gravel, oil and other impurities on the surface; and dry it to remove moisture.
2. Mix the adhesive evenly according to the specified proportion and scatter it on the bottom plate; use a adhesive mixing knife to apply adhesive on the stone bonding parts and apply pressure to the bonding parts by moving with hands, to exclude air between plates and to make adhesive fill the plates; there must be appropriate amount of adhesive outflow.
3. Align the upper and lower stones, place them steadily for curing and adopt fixture to apply uniform pressure.
4. At room temperature, the pressure on plates can be released after 2-3 hour curing and the plate will be put into next process after 24 hours. At low temperatures in winter, the stacked plates will be heated evenly for 2-3 hours in 50-60 ℃ curing barn and will  be put into next process after being naturally cooled to room temperature.
5. The reference adhesive amount for composite plate is 400-600g/m2; it is recommended to adopt single-sided or double-sided adhesive coating.
6. Add special toner in the adhesive according to the different colors of stones and adjust it into a color similar to the stone; the largest adding volume of toner is 3‰ of adhesive amount.

[Protection Measures]
For different workers, the glue may irritate the skin, but the product meet national standard GB18583-2008, it is environmental friendly and no harm to human body.

When using this glue, please take the protections as below:
1.Use the glue in the ventilate environment
2.Wear the protection cloths, gloves and mask
3.In case the glue contact skin directly, if any, clean with the soap water
4.Before mix the glue, open the cap of Part B first, wait for the volatility of the free low molecular materials
5.If any irritation to the skin, better to change to other jobs.

1.Some facts will affect the performance of the glue as below:
The stone is not dry enough or the air humidity is too high, the stone absorbed the moisture from air
Part A and B was not mixed exactly base on the stipulated ratio Glue mix uneven or not completely
Mixed the apparatus of A and B, the glue is cured in advance The mixed glue was not used up within the pot life

2.In winter and low temperature, the product may form crystal or caking. Just heat up the glue and make the crystal or caking dissolved, this will not affect the glue performance.

3. Clean and wipe the glue on cloth or skin before it cured with alcohol, then flush with soap water. If in eyes, flush with plenty of water and seek for medical cure; if swallowed, do not emetic, drink plenty of egg white or milk, then seek for medical cure immediately.

[Stock and Package]
1.Sealed and stock in cool, dry and ventilate place, stock temperature under 5-40℃. Shelf life one year from the production date, it can be still used based on passing the test when beyond the shelf life.
2.This product is corrosive goods, keep far away from the heat, fire, sunshine and rain during delivery and stock. In the process of transportation, operate gently, it is prohibited to roll, impact, stress, inversion, and offset
3.Packing size: 2Kg/set or  18kg/set, in plastic bottle packing;

[Important Notes]
1.For materials to be bond are different, this may affect the glue performance. Please have a try before plenty use.
2.We solemn promise: we produce the products according to our enterprise standard strictly, we will responsible for the product quality, but not responsible for the operation process.
3.To provide the certified products to our customers, we operate strictly according to Quality systemISO9001 and Environmental management system ISO14001. Our technology suggestions in oral, written and experiment is from our honestly, which can not be our guarantee. Please read the instructions carefully before use, also arrange testing to ensure the glue is suitable for your process and applications.
4.We can not control the goods stock & delivery, operate condition and process, we will not responsible for the quality and related lost from the incorrect operations.
5.Any employees from our company can not revise or disregard the terms above.

[Executive Standard]
National Mandatory standard:GB24264-2009

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :